Een spotpositie met marge verrekenen

Door het openen van een spotpositie met marge (https://support.kraken.com/hc/en-us/articles/203250333-Opening-a-margin-position)*, gaat u overeenkomstige verplichtingen aan, inclusief de verplichting om het bedrag van de marge-uitbreiding aan Kraken terug te betalen door middel van verrekening van posities en één of meerdere sluitingstransacties.

Hoe werkt de verrekening van posities

U kunt een spotpositie met marge geheel of gedeeltelijk sluiten door rechtstreeks vanaf uw accounttegoed, zonder dat er een trade aan te pas komt, geld naar ons over te maken van het type dat door Kraken is gebruikt om de initiële marge-uitbreiding te maken (bijv. als u een marge-uitbreiding van Kraken hebt genomen die in BTC is uitgedrukt, moet u voldoende BTC op uw account hebben om de positie te verrekenen). Bij de afwikkeling behoudt u de asset die u oorspronkelijk van de markt hebt ontvangen op het moment dat de positie werd geopend, vrij van alle beperkingen die eerder aan uw margeverplichting waren verbonden. Er zijn geen tradingkosten verbonden aan het uitvoeren van een verrekeningstransactie. Als uw accounttegoed niet voldoende is om een verrekeningstransactie aan te gaan, kunt u extra geld aan uw account toevoegen. Als u voldoende geld op uw account heeft, maar dit is niet van het type dat door Kraken wordt gebruikt om de initiële marge-uitbreiding te maken, kunt u een order uitvoeren voor het type en de hoeveelheid geld dat u nodig heeft om de positie te verrekenen (bijv. 1 BTC van BTC/USD kopen).

Opmerking: Als u meerdere posities hebt, worden deze verrekend in de volgorde waarin ze zijn aangemaakt volgens de FIFO-regel ("<a href="https://support.kraken.com/hc/en-us/articles/206141657-Closing-or-Settling-Multiple-Positions" target="_self">First in, First Out

Laten we twee voorbeelden bekijken:

You may close all or part of a spot position on margin by transferring to us, directly from your account balance with no trade involved, funds of the type used by Kraken to make the initial margin extension (e.g., if you took an extension of margin from Kraken denominated in BTC, you must have sufficient BTC in your account to settle the position). Upon settling, you retain the asset that you originally received from the market at the time of the position’s opening clear of any restrictions previously associated with your margin obligation. There are no trading fees associated with entering into a settlement transaction. If your account balance is not sufficient to enter into a settlement transaction, you may deposit additional funds into your account. If you have sufficient funds in your account, but they are not of the type used by Kraken to make the initial margin extension, you may execute an order for the type and amount of funds you need to settle the position (e.g., buy 1 BTC of BTC/USD).

Note: If you have multiple positions, they will be settled in the order they were created following the "First in First Out" (FIFO) rule.

Let's look at two examples:

  • To settle an open “short BTC” BTC/EUR spot position on margin, you must transfer to Kraken the amount of BTC you sold on the market for EUR when you opened the position. This satisfies your obligation to return to Kraken the BTC that Kraken extended to you when you opened the position (i.e., sold the BTC for EUR).

  • To settle an open “long BTC” BTC/EUR spot position on margin, you must transfer to Kraken the amount of EUR you used to purchase BTC on the market when you opened the position. This satisfies your obligation to return to Kraken the EUR that Kraken extended to you when you opened the position (i.e., used the EUR to buy BTC). 

Position settlement may only be initiated via the Advanced order form from the New Order page, or through the API.

Trading_SettleSpotMarginGuideUpdate_09092021.png

 

Order Type

Position settlement may only be initiated through a specific order type, Settle Position. The Settle Position order type is only found on the Advanced order tab from the New Order page. Make sure it is selected.

Pro Tip:

  • To settle a long spot position on margin, use a buy/settle order type.

  • To settle a short spot position on margin, use a sell/settle order type.

Selecting a level of leverage is necessary (e.g, minimum 2x) in order to initiate an order for position settlement. However, the level of leverage selected does not need to match the leverage level you used to open the position. This is because, other than indicating to Kraken’s system that the order you are placing is for position settlement, the leverage selected is irrelevant in a settlement transaction.

Currency pairThe position settlement order must be in the same currency pair as the order that opened the spot position on margin.Specify how much volume you want to settle. You may settle a portion of an open spot position on margin if desired.

Examples

Om een openstaande 'long BTC' BTC/EUR-spotpositie met marge te verrekenen, moet u het bedrag aan EUR dat u heeft gebruikt om BTC op de markt te kopen toen u de positie opende, overmaken naar Kraken. Hiermee voldoet u aan uw verplichting om de EUR aan Kraken terug te betalen die Kraken aan u verstrekte toen u de positie opende (bijv. EUR gebruikt om BTC te kopen). Een spotpositie met marge verrekenen

Positieverrekening kan alleen worden geïnitieerd via het Geavanceerde orderformulier op de pagina Nieuwe order of via de API. (https://www.kraken.com/features/api#add-standard-order)

Ordertype

Positieverrekening kan alleen worden geïnitieerd via een specifiek ordertype: Positie verrekenen. Het ordertype Positie verrekenen is alleen te vinden op het tabblad Geavanceerde order op de pagina Nieuwe order. Controleer of dit type is geselecteerd.

Professionele tip:

Suppose you buy 1 BTC of BTC/EUR at 2x1 leverage (going “long” BTC).

  • To settle the entire position, you buy/settle 1 BTC and select the BTC/EUR trading pair (at any leverage - the specific level of leverage selected is irrelevant).

  • To settle half the position, you buy/settle 0.5 BTC and select the BTC/EUR trading pair (at any leverage - the specific level of leverage selected is irrelevant).

Suppose you sell 1 BTC of BTC/EUR at 2x1 leverage (going "short" BTC):

  • To settle the entire position, you sell/settle 1 BTC and select the BTC/EUR trading pair (at any leverage - the specific level of leverage selected is irrelevant).

  • To settle half the position, you sell/settle 0.5 BTC and select the BTC/EUR trading pair (at any leverage - the specific level of leverage selected is irrelevant).

"Settle Position" orders work as described in our API documentation under the private user endpoint 'Add Standard Order' (AddOrder) with the "order type" as “settle-position”.

Om een short spotpositie met marge te verrekenen, gebruikt u een ordertype verkopen/verrekenen.

Examples

Meer hulp nodig?